Các Phúc Lợi Dành Cho Bạn
Mô Tả Công Việc
As a Senior Process Engineer, you are responsible for:
• Conceptualize, develop, implement and release production processes during Product Engineering Process (PEP) and Product Transfer Process (PTP) projects for new products introduction within its required quality, costs and timeline. Focus product: Molded plastic part
• Lead & participate in Improvement Projects (CIP) on demand
• Lead and own 2 production technologies as Process Engineer during PEP/PTP project and as a Local Technology Owner (LTO)
o Molding Technology – Injection Molding, Over Molding, Hotmelt Molding, Connector over-molding etc.
o Cable Harnessing Technology – Cut & Strip, Crimping, etc.
• Lead and own 2 product groups (Molded plastic part & cable / connector) as a Local Product counterpart for Production / Business Unit (BU) / Innovation Unit (IU) / Research & Development (RND)
• Participate & Deliver results in Projects at SEA regional level and if needed at Global Projects
JOB ACCOUNTABILITIES
1. You are a part of the Industrial Engineering team to industrialize new product or transfer current products between locations according to company initiatives (PEP and PTP) – starting from Conceptual to Development & then Implementation phases to ensure that products meet the quality target.
2. Within PEP/ PTP, you are responsible, but not limited to, End-to-End Process Engineering tasks (Focus product: Molded plastic part)
• plan and manage own budget (working hours) & timeline & communicate with Supply Chain project leader
• discuss the design & production process concept (DFM / DFA)
• participate actively in Risk Assessment (P-FMEA or similar tools)
• select the most suitable technology (from Technology supermarket or similar) & perform feasibility studies if required
• prepare process qualification plan
• technical management of reliability test & qualification process with Quality department
• prepare machine requirements, develop the process parameters, evaluate and qualify different material, create work instructions
• perform machine, fixture and process releases using standard methodology (MSA, capability studies) and software (e.g. Minitab, qs-STAT)
• request, consult and release fixtures which impact product / process quality
• prepare new machine set-up, operation, maintenance procedures
• perform prototype build, follow-up pilot run and troubleshoot process problems during the build
• define the critical process parameters, prepare process control plan, and provide training to staff
3. You are responsible to lead and participate in Improvement Project (CIP) on demand.
Within the project, you are responsible, but not limited to, following tasks:
• manage stakeholder, plan project (quality / cost / time)
• form team & assign tasks
• analyze data & solve problem
• run & report the project progress
• communicate & escalate when any target cannot be met on demand & handle deviation
4. You are a Subject Matter expert, responsible for, but not limited to, following tasks:
• lead a team of global experts in the Global Expert Team (GET) to achieve improvement and global standardization (valid for GTO only)
• testing, performing trials and qualification of new material, machines and technology with Technology Development department on demand
5. You are Local Product counterpart for Production & BU/IU, responsible for, but not limited to, following tasks:
• summarize, report & do structure problem solving to solve product / process issues during PEP / PTP / CIP projects
• discuss product design concept during PEP / PTP / CIP project, enforce product-related process design rule
Yêu Cầu Công Việc
• Minimum a Bachelor’s Degree in Mechanical / Material Science Engineering or equivalent education. Master Degree is an added advantage
• Minimum 7 years of relevant professional experience in manufacturing with at least 5 years as process engineer in molding environment, preferably high-precision molding
• Proficient in English in both verbal and written communication, good at German is an added advantage
• Possess theoretical & practical knowledge & experience to industrialize & introduce new products as a Process Engineer, following industrial standard procedure like APQP, DFSS, etc.
• Possess in-depth theoretical (material science, methodology) & industrial relevant (mold & machine-related) experience in the molding (must-have) and cable harnessing area
• The molding knowledge should be in the following area:
o material selection based on its property & flow (plastic viscosity, pressure, temperature)
o part-form design for manufacturing & simulation, review & verification (drawing design simulation)
o mold design understanding (steel properties, roughness, hardness & mold structure)
o mold simulation, review & verification (material, cavity layout, gate layout, shot weight, cooling, hot runner, material flow, temperature control, pressure control, etc)
o experience using mold simulation software (e.g. MoldFlow, etc) for design for manufacturing discussion, part & mold design discussion
o machine and parameter setup & verification & maintenance
o mold setup & verification & maintenance
o defect analysis & problem solving related to molding
• The cable harnessing knowledge should be in the following area:
o Cable cutting & stripping machine verification and setup
o Cable crimping machine & tools setup and verification acc. to industrial standard
o Connector over-molding process setup and verification
• Have project management skill, able to plan and adapt quality, cost, time depending on different scenario.
• Good problem solving skills with track record
• Understand preventive maintenance methodology & execution.
Have we piqued your interest?
Then we would like to meet you. We look forward to your application!
Pepperl+Fuchs là một trong những nhà sản xuất cảm biến điện tử và công nghệ phòng chống cháy nổ lớn nhất thế giới. Công ty đã và liên tục thiết lập những tiêu chuẩn chất lượng và cải tiến quy trình tự động hóa cho các nhà máy trên toàn thế giới trong hơn 60 năm qua. Chúng tôi có các nhà máy tại Đức, Singapore, Indonesia, Hungary, Ấn Độ và Việt Nam với hơn 30 công ty con trực thuộc và hơn 5,300 nhân viên trên khắp thế giới. Có mặt tại Việt Nam từ năm 2007, Pepperl+Fuchs Viet Nam đã liên tục phát triển, cũng như tạo ra công ăn việc làm cho hơn 550 công nhân viên với trình độ chuyên môn kỹ thuật cao. Với phương châm cải tiến liên tục; lấy chất lượng, uy tín và sự thỏa mãn khách hàng làm trung tâm cho mọi hoạt động, Pepperl+Fuchs Việt Nam đã không ngừng cải tiến từ công nghệ đến đào tạo để tạo ra một đội ngũ lao động với trình độ tay nghề cao nhằm đáp ứng yêu cầu tiếp nhận sản phẩm và chuyển giao công nghệ mới từ các Công ty Pepperl+Fuchs khác trong tập đoàn. Mặt khác, chúng tôi đang nỗ lực để trở thành một trong tốp 10 công ty điện tử hàng đầu tại thị trường Việt Nam.
Review PEPPERL+FUCHS (VIETNAM) CO., LTD
Lương không cao, gần như không OT (RV)
Môi trường làm việc chuyên nghiệp và thân thiện
Môi trường làm việc tốt giữa các công ty châu Âu tại Việt Nam