TTCL Việt Nam ★ 3.0

* Job Brief
- We are looking for an experience QC engineer to Control the quality of construction project for piping system and equipment erection at our construction sites. QC engineer will planning and apply the quality control system to ensure the quality of construction works in our project at site and some equipment at work shop.
- QC engineer will also attend the inspection activities of their scope of work to ensure the result of inspection and test are satisfy with design, project specification and code or standard application. QC inspector need to have good experience in welding, material, and technical about NDE work. QC Engineer must be competent in visual inspection, planning, and execution following the planning. Ensure the safety of related task.
* Responsibilities
- Prepare the quality procedure such as Inspection procedure, Inspection and test plan, welding control procedure, welder qualification procedure, pressure test procedure, and setup project operation follow the quality control system.
- Cary our pre-inspection meeting with subcontractor before fabrication.
- Control the inspection Report and inspection Notification status.
- Check the equipment installed/ erected follow approved drawing.
- Check material using correct with design.
- WPS and PQR review.
- Welder qualification.
- Control daily routine work of subcontractor such as: welding condition, material condition, consumable using for welding, welder random check.
- Control welding history and material traceability.
- Control the NDE following project requirement.
- Control PWHT.
- Make piping test loop.
- Pressure test inspection
- Painting inspection.
- Make inspection report.
- Control the nonconforming product.
- Daily report for working to leader.
- Training and coaching for QC inspector.* Requirements
- Knowledge for international standard such as: ISO, API ASME, ASTM...
- Knowledge for material using in construction project for piping, tank, pressure vessel, steel structure, must be able to read and understand requirement of material in ASME SECTION II
- Know well for welding and welding symbol follow AWS standard.
- Knowledge for welding procedure and welder performance qualification as ASME SECTION IX.
- Ability perform visual inspection after welding.
- Knowledge about PWHT and hardness requirement.
- Knowledge about NDEs method and select the suitable method for apply. Know weld about acceptance standard of NDE and NDE procedure as ASME section V.
- Ability to read and interpret technical documents and drawings.
- Professional certification and experience for control the Double wall storage tank/ Sphere tank will be a plus
- Experience require: minimum 3 years' experience with QC engineer position.Được đi du lịch 1 lần trong 1 năm
Quà chúc mừng sinh nhật
Được hưởng chế độ BHYT, BHXH, BHTN theo quy định
Chương trình chăm sóc sức khỏe cao cấp dành cho nhân viên thâm niên 2 năm
Môi trường làm việc hòa đồng, thân thiện